Windmills Doily, Completed TIAS, And Another Orchid Photo

I know, I know. I said I could post last week, and I didn't. I would have, but I forgot my camera here in the city, and couldn't take any photos of my completed work. Also, I seem to have caught a cold (AGAIN!) or my first one came back. I'm not quite sure, so I haven't done much tatting this week. I'm kinda bummed out, but then again I didn't get a cold last year.

I'm sure everyone by now is aware of the passing of beloved tatter and designer Mary Konior. I too am a big fan of her and her tatting designs. While I never met her, or had the opportunity to see her tatting in real life (the latter is still possible since HBT's founder Sue Hanson was given the honour of caring for the lace, and brings it to tatting events for all to see), I am proud to own two of her tatting books, Tatting Patterns and Tatting With Visual Patterns. Since hearing of her passing, I have made it a goal of mine to find the other two books. Hopefully I can manage this without spending a large amount of money (what are those people on eBay and Amazon thinking!!!!!!!!). Anyway, Rest In Peace Mary. Hopefully you are tatting with the other tatting legends that left the Earth before you did.

As you all know, I have been tatting Mary's Windmills motif lately. I also mentioned that I wanted to make a small doily using that motif. As a tribute to Mary Konior, here is the completed doily:


As you can see, the reason Mary called the pattern "Windmills" really shows once you have several joined together. A windmill is very evident in the centre of the doily. While I said the doily is complete, that isn't technically the case. As pictured above, the doily is about 6 1/4 inches in diameter. That's too small for my purpose, so I'm going to add another round of motifs. That will be another 12 motifs to make. Of course, once that round is done, I may decide to add another. I show you how it looks once I'm done the next round. I am using DMC Cordonnet size 20 thread to make this doily.

I have also completed Jane TIAS 2010. I'm terrible with the daily progress so we will go straight to the finished motif.

As you can see, our mystery motif turned into a rooster. I was beginning to wonder partway through, but it began to look kinda bird like towards the end. For this motif, I used Lizbeth size 20 in colour numbers 656 (Dark Wedgewood Blue) and 142 (Turquoise Twist), along with DMC Cordonnet size 20 (White). I'm actually quite pleased with my colour choices (especially since I didn't plan ahead and just picked a colour when they were needed). This will be Motif # 16 of my Third 25 Motif Challenge.

Finally, I have another orchid photo to share with you. This is a relatively new addition to my collection. First, the whole spray:

Next, just a single flower:

This particular orchid is a Cymbidium. More specifically, the plant is called Cymbidium [(Via Ireland 'Delightful' x (Pendragon x Camelia 'Yellow Sunset')] 'Shamrock'. Whew. That's quite a name. I find the green colour of the flowers quite nice. While this is only my second one, I'm getting quite fond of this genre of orchid. I think it's their large size, and their relatively easy care that probably has something to do with it. I may have to get another one.

Before I forget, I would like to thank everyone who has commented over the past few weeks. I haven't had a chance to comment lately. In particular, I would like to thank Miranda for her suggestion on eliminating the little dots of colour on my colorized Windmills motif I posted about earlier. Miranda suggested using a "Slope and Roll" join. See this page: (http://www.ds9designs.com/patterns_free.shtml). Scroll down to the bottom of the page for the link. I tried it out on another pattern and it seems to work well. I'll try it out on another Windmills motif and post my results.

Well, that's it for now. Hopefully, I'll post again soon. Till next time.

Windmill Motif, TIAS 2010 Progress, and The Return of The Mutated Orchid

Before I begin this post, I am pleased to announce that I am feeling much better. I felt absolutely terrible on Sunday and Monday. It probably didn't help that I went to work despite not feeling well. But by Wednesday, I was beginning to get better. Sorry for the health update, but I didn't want anyone to worry. Um, you were worried right? Anyone?

As I mentioned in my previous post, I planned to retat Mary Konior's Windmill motif, using white thread. Well here it is:


I really like the motif in white, although any solid colour may work well with this design. Though, I think the main problem I have with my previous attempt of the motif was with the little dot of colour that occurs at the base of the many shuttle/lock joins that are needed in the pattern. Hopefully you know what I'm talking about. I have been playing around with other joining methods to prevent the dot of colour. What I'm trying is when joining to pull the thread from the front to the back. It seems to help, but if anyone else has a suggestion, I'd love to hear it. Thread stats: DMC Cordonnet size 20 in white. I am planing on making a small doily, consisting of seven motif. Of course, I may decide to join more motifs once I have the seven done. I'm not counting this in my current 25 Motif Challenge since I already counted the other one.

Next on my list is Jane's TIAS 2010. I have skipped the last few TIASes, so I am trying to keep up with this one. I love the concept of the TIAS. You tat a little bit of a pattern every few days, until you are done. You don't know what you are tatting, until you are close to the end (usually); Jane, and the other ladies who have hosted a TIAS are pretty good at hiding the identity of the motif. So here is my current progress:


The top image is my progress after Day One, and the bottom one is after Day Two. I'm using Lizbeth size 20 thread in colour #142 (Turquoise Twist). The next three days will not be shown individually. I, um, forgot to scan the piece after I did each days tatting.

Here is Days 3, 4, and 5. I used DMC Cordonnet size 20 in white for these days. And, as you can see by the two ends showing, we aren't done with this piece. While the previous piece looks intriguing, these three days looks especially interesting. I'm still not sure what we are making, but I can't wait to find out.

Finally, I will end this blog post with an orchid photo. As the title suggests, the new year welcomes the return of The Mutated Orchid:

I love this orchid. As I mentioned in the first post about this orchid, it is a Phalaenopsis orchid with a mutation that causes the plant to have three lips instead of one. This is referred to as a Peloric mutation. I'm glad that the plant produced the mutated flowers again, but I guess it should since the plant re-bloomed on the same flower stalks as the last time. Which, while writing this post I realized that it has taken the plant about 15 months to re-bloom. I'm pretty sure it takes less time to happen, but I guess the mutation could have caused it to take longer. No matter; I'm just glad it has produced more flowers.

That's all for now. I'm not sure if I'll get a post up next week. I am going to my parents next weekend (well, I'm leaving Thursday after work) to pick up a new truck. My dad had the opportunity to buy my grandmother's truck off of her estate, and he's letting me buy his truck off of him (which is a 2006 model while the one he bought is a 2009 model). But we'll see. My parents also recently had a satellite internet service installed, which will provide a high speed service to their farm, so a post is possible. Till next time.

More Christmas Tatting, New Years, and Other Stuff

I think the title covers everything I'm going to talk about. First of all, Happy New Years! I hope the start of 2010 is being good to everyone. I would have posted earlier, but I haven't been feeling good since New Year's Eve. Right now, I'm in the middle of a full blown cold, which has left me pretty much drained of energy for the past few days. Lately, my daily routine seems to be go to work, come home, sleep. But enough about me, let's move on to the tatting.

I think I mentioned in my last post that I had one motif left to show you from the tatting I did over Christmas. However, I forgot about one, so I actually have two motifs. The first motif is a "snowflake". I put the word snowflake in quotation marks because I don't think Mary Konior intended the motif to be used that way. The motif in question is Mary's Windmills motif:


I used Lizbeth size 20 in colour number 128 (March Breeze). Before anyone says anything about my colour choice, let me explain. I though it would look good. OK, I'm now ready to hear your comments. Honestly, I don't hate the way it turned out, but I'm not sure I'm lovin' it either. It kinda grows on you after a while. Except for the six rings in the middle, the patterns consists of all chains. I will be making this again-in white. This is motif 13 of my Third 25 Motif Challenge. And before I forget, the pattern is from MK's Tatting with Visual Patterns.

The next motif is also from Tatting with Visual Patterns. It is the Masquerade Motif.

This was tatted with Lizbeth size 40 colour number 100 (Falling Leaves). I like the way this motif turned out. This is another of Mary's motifs that would make an awesome bookmark when several are joined together in a strip. Which I plan to do sometime. This will be motif 14 of my 25 Motif Challenge.

Recently (ie: last weekend) I began to tat from my newest tatting book. That book would be Ruth Perry's Celtic Tatted Leaves and Flowers. There are a number of really interesting designs in this book. Some pretty easy, to a few that are substantially harder. All beautiful. I have tatted three different leaf patterns for your (and my) enjoyment.

The first leaf that I tatted is an Arrowhead or heart shaped leaf. This is probably the simplest design in the book. Ruth has a picture in the book showing several leaves and a couple curly tendrils attached to a stem. I think this is a really cool way of using this pattern. One could tat several long (and short) lengths of leaves and stems and display them in a decorative pot.

The next leaf that I tatted is the Elm or Rose leaf. It is slightly more difficult design than the previous one, but not by much. As you can see, Ruth used what she calls the Celtic Twist to make the centre of the leaf. She uses this type of Celtic knot in a number of her designs, most notably the Celtic Snowflake that she shared with us last year, and the Celtic Maple Leaf that many of you probably have seen before. And speaking of the Celtic Maple Leaf:

You knew I had to tat this pattern, didn't you? Like many, I have been waiting for the pattern to be available. Despite its looks, it isn't terribly hard. There is one small section that uses the same technique as split chains, and I'm sure you can use a regular chain if you want to instead. I really like this leaf and I plan of making it again. In case you are wondering I used Lizbeth size 20 thread in colour # 684 (Light Medium Green) for all three leaves. I am also going to count all three motifs as Motif #15 for my 25 Motif Challenge.

There, I'm finally done writing this post. Its taken me almost three days to write it due to my cold. Right now, my heads all stuffed up and I am contantly getting a sensation that I am going to sneeze, but I don't, which is getting really annoying. I'm not sure if I will get much tatting done this weekend. I did a little bit this afternoon, and I'm also tatting Jane's TIAS (which I need to scan before moving on to the next part). I received a request for a chainmaille necklace through Etsy, which I plan on working on tomorrow. I'll show you pictures once I'm done. Well, that's all for now. Till next time.



----------------
Now playing: The BBC National Orchestra of Wales - All the Strange Strange Creatures (The Trailer Music)
via FoxyTunes

Christmas Tatting & Other Stuff

I hope everyone had a Merry Christmas (or whatever you celebrate). My Christmas was really great. I went to my parents, where we had a pretty quiet Christmas. I did get some tatting done, which I will now show you.

The first motif is the one I told you about in my last post that needed some stiffening and shaping before I could show you.

This is the Bell Ornament from Heirloom Treasures in Tatting, an Annie's Attic Publication. This is a really nice pattern to tat. It is made in 11 rounds, and thus has 11 cut and ties. Utilizing split rings and chains, I reduced the number of cut & ties down to four. I could have done it in three, but I need to add some thread before beginning the eighth round. For this motif, I used Lizbeth size 20 in silver, #605. The last round has some silver beads, and I added some ribbon. And a little jingle bell inside. This is motif #10 of my Third 25 Motif Challenge.

My next piece is from Lene Bjørn's book 24 Snowflakes in Tatting.

This is The Third Day of Christmas snowflake. This is a nice snowflake to make. It isn't hard, and tats up pretty rapidly. I think I tatted the centre a little too tightly. I noticed after I made it that the centre chains are supposed to lie above the previous row, not behind them as I tatted it. I still think it is a really nice snowflake. One of these days I will have to tat the snowflake in Pamela's Rainbow Brite HDT. Thread stats: I used Lizbeth size 20, #663 (Dark Turquoise) for the centre and Lizbeth size 20 in colour #142, Turquoise Twist for the outer round. This will be motif #11.

The next snowflake is another snowflake from Lene Bjørn's book.

This is The Second Day of Christmas snowflake. This is a really nice snowflake, however it needed A Lot of blocking in order to make it look presentable. If lace could scream, I'm sure the neighbours would have called the police. OK, I may be exaggerating a bit. Thread stats: for this snowflake, I used Lizbeth size 20 in colour # 611, Gold. This will be motif #12 of my Third 25 Motif Challenge.

I did tat another motif, but I haven't scanned it yet. I'll have it ready for the next post. That's all for now. I'm hoping to get a little bit of tatting done tonight yet. I bought myself a copy of The Complete Fourth Series of Doctor Who, which I am currently watching (though, when you read this, I probably won't be). This is probably my favourite series/season of the new Doctor Who, however I don't like the way this series ends. I found it very unfortunate that the Doctor has to wipe Donna's mind. But that's just my opinion. I'll stop talking now, and will get to my tatting. Oh, before I forget, Be-Stitched is currently having a sale right now. Use the coupon code SALE2009 to get 20% off your entire order until Midnight Dec. 31. And yeah, I ordered more Lizbeth thread. VBG! Later.

Merry Christmas

Merry Christmas!!!!!

I hope everyone has a safe and Merry Christmas.


This has been a recording.

Snowflakes and Tatted Trees

I was kinda hoping to post a little earlier, but I guess I got a little busy. I have managed some tatting, which I will now show you. At least most of it. I have one piece that needs stiffening, and haven't done it yet. I will (hopefully) get pictures once it is finished.

The first tatted motif is a Jane Eborall original. It is, of course, Jane's Snowsettia,

This is a really cool pattern by our very own Jane Eborall. It isn't difficult, though there are a lot of split rings. And juggling four shuttles took some practice (and an extra arm or two would have been nice as well). I ended up placing the two unused shuttles in a small ziploc bag while tatting with the other two. I thought the colours I chose would look good, but the two "conjoined" snowflakes kinda blend together. I will be making this design again. I saw a really cool colour combo on another blog. This will be my 7th motif of my Third 25 Motif Challenge. Thread stats: I used Lizbeth size 20 in colour #116 (Christmas Delight) and DMC Cordonnet size 20 in white.

The next motif is one you should have seen on Pamela's blog. It is The Sixth Day of December from Lene Bjørn's book 24 Snowflakes in Tatting. I have had this book for a few years, but I have only made one snowflake from it. Like many others, Pamela has inspired me to try some of the patterns in the book. For this snowflake, I used Lizbeth size 20 in colour #656 Dark Wedgewood, one of the new colours of Lizbeth I recently bought. I love this colour! I bought it in both size 20 & 40. And its all mine! I'm not kidding. This is motif #8.

The last motif is another one that I'm quite certain you all have seen. It is Nancy Tracy's Tatted Tree:

I have made this pattern before, but I didn't get a decent photo of it. This is a really nice pattern to tat. It's not difficult, and easily deserves the beginner level Nancy has given it. I'm not sure you can tell, but I purposely made the picots somewhat uneven in length. Not dramatically, but enough that it should be noticeable. I thought the tree looks better with the picots uneven; its more realistic IMHO. For this motif, I used Flora size 20 thread in colour #230. This is motif #9 of my Third 25 Motif Challenge.

That's about all for now. I will be away from Dec. 23-26 for Christmas. I don't know if I will close my shop though. I think I will just put up an announcement on the front page. I will try to post again before I go. My parent don't have high speed yet. I hope to get a lot of tatting done, and I'll post about it when I get back. Till next time.

Mary Konior's Patchwork - Bookmark For TattingChic

Before I begin the tatting portion of this blog post, I want to make a quick shop announcement. I'll make it short. I have decided to offer free shipping to Canada and the United States for the month of December. Overseas shipping has been reduced by the US shipping amount. OK, enough of that. Time for the tatting.

My previous post was about the bookmark I received from TattingChic. This time I will show off the bookmark I made TattingChic. After scanning through websites and pattern books, I decided to use a motif from Mary Konior's Tatting With Visual Patterns. I chose "Patchwork".

The above motif was actually the third motif I made for Tattingchic's bookmark. However, on the third repeat, just before I was going to join it with the first two, I made a mistake-sorry, design variation. I made one of the large chains (at the top in the above photo) smaller than the other. I didn't want to retro-tat to fix the mistake-er, design variation, and I couldn't join it to the completed two motifs. So I just finished the motif. I'm sure I find some use for it.

You're probably wonder what the finished bookmark looks like. Well, here it is:

I really like how it came out. Please note: I don't remember if I blocked the bookmark before or after scanning. So it probably looks better than the above photo. Anyway, here are some stats for the bookmark. I used Lizbeth size 40 thread in colour #120 Denim Whisper. TattingChic likes pink and other "girly" colours, and this was as close I could get. I have to admit, I can't say I have ever owned anything denim with pink in it. I usually think of denim as shades of blue. But, its still a nice colourway. This will be #6 of my Third 25 Motif Challenge.

Finally I decided to treat myself to some more Lizbeth thread. I love this stuff! I wanted to get a few of the new colours that had been recently added to the growing list of colours. I would like to mention that Handy Hands isn't the only place to buy Lizbeth thread. Both DS9Designs and Be-Stitched carry Lizbeth. I ordered from DS9Designs since they also carry Superior Threads products such as King Tut and Perfect Quilter threads. But Be-Stitched has cheaper shipping options, which is nice when you only want a few balls of thread.

That's all for now. I was hoping to have the pattern by Jane finished, but I've spent the last few days working on chainmaille stuff for my shop. Hopefully I can do some tatting after work tomorrow. Later.

Bookmark From TattingChic

I mentioned a while back that I was involved with a tatting exchange. Well, the exchange is over. We tatted, mailed our bookmarks, and the bookmarks have been received. As the title indicates, TattingChic was my exchange partner. This was a private exchange, by the way. I'm only going to show the bookmark I received today. I'll show off what I sent TattingChic in my next post.

Here is the bookmark I received from TattingChic, first the back:

And then the front:


Isn't it pretty? This is LaRae Mikulecky's Celtic Bookmark. TattingChic mentioned in the card she sent that the site that the pattern was located on has gone down. However, I did find the pattern in the Internet Archive. If you've never been here before, you simply type or copy&paste the link you want to find into the box with the large "Wayback Machine" logo and click the "Take Me Back" button. Here is the link to the above pattern. For the bookmark, TattingChic used Lizbeth size 20 in Denim and Light Medium Blue as well as an unidentified green in size 20. TattingChic chose the colours and the pattern to be as "manly" as possible. I think she did an awesome job. Thank you TattingChic!!!

TattingChic also sent a really cool card, which was also chosen for being the mostly manly, or (as she put it) the least girly she had. I love it too.

I'm not sure if you can see, but the buildings at the bottom has a really cool 3D look. The 3D effect is much more pronounced in real life. Thanks again TattingChic.

In unrelated news, I am toying with the idea of offering free shipping for my chainmaille jewelery and accessories for the month of December. I'm thinking the free shipping offer would apply for North America, but world shipping could be reduced by half or so. We'll see. Yeah, I know. December starts tomorrow.

That's all for now. I'll post again in a few days, showing the bookmark I made for TattingChic, and hopefully the Jane Eborall design that I should finish tonight. Later.

Gina's Gingerbread Boy

I love this pattern! Ever since I saw it, I wanted to tat it.

You'll probably want to click on the image to see it better. I'm not sure why, but I tend to get pretty funky scans when using a white background. I adjusted the image a bit to make it easier to see. The pattern is from our very own Gina B, The Tatting Goddess. There is a link on Gina's blog to get the pattern, you will need to click the esnips link at the top of Gina's "Patterns & Tutorials" list on her sidebar. The pattern isn't hard, but you do need to pay attention to it for the proper joins, and the outer round of chains and the frosting round are (kinda) free tatted (ie: Gina just gives approximate stitch counts, you will need to adjust them to your own tension). I should mention that I did make a few mistakes (I think, it still worked out). I joined the head to the wrong rings on the body. Gina mentioned that a join was needed on one beaded picot, but I didn't mark which one. This join caused the top beaded ring to become heart shaped. I also added the first eye between the wrong set of small and large rings, and my attempts at adding the second eye to match the first were wrong as well. However, I will be making this pattern again; I was going to give this one away, but I don't want to now. Some stats: I used Lizbeth size 20 thread in colour #692 brown and DMC Cordonnet size 20 white for the frosting. This will be #5 of my Third 25 Motif Challenge.

This is actually an important day for me. Two years ago, I contacted Gina for the first time about this pattern. I'm embarrassed to admit that it took me two years to finally tat the pattern. Though I only tried the pattern three times; the second time was right after I contacted Gina. Both previous attempts were not completed. I am glad I finally tatted the Gingerbread Boy. Thank you Gina for the pattern. Till next time.

New Chainmaille Project, and it Has Tatting

If you've been to my shop recently you may have seen what I am talking about. I am talking about my Byzantine Scissor Fobs:


I did a fairly exhaustive search of Etsy, and couldn't find anything like this, so I am confident that I am the first person (on Etsy, anyway) to have come up with this idea. The scissor fobs are actually a scaled back version of another idea of mine. My initial idea was a chainmaille Chatelaine, but I scraped that idea since I was unsure of how practical it would be. And plus, I have no need for one. Anyway, the above scissor fobs are made of aluminum and anodized (coloured) aluminum. The byzantine section is about 3.5 inches long with about 2 inches of plain chain to facilitate attachment to the scissors.

Now, many of you may be wondering where the tatting comes in, well, you see the large split ring on the end of the fob? You can use that to attach beads, trinkets, etc. to it. That includes tatting:

See? This is one of Marilee's Carnival Earrings added to my prototype scissor fob. Isn't it pretty? Assuming they sell well, I hope to add other chainmaille weaves to my scissor fob line.

That's all for now. My next post should be completely tatting related. Later

Featherline Snowflake

As usual, the title says it all. I finally managed to tat Jon's latest snowflake. Actually, I tatted it about a week ago, but am only now posting it. I won't keep you in suspense.

Actually, I will for a bit. I want to thank everyone who commented on my last post. I'm glad you all liked my costume, especially since I don't normally dress up (I really want to stress that). In case anyone is interested, the tutorial I used to make the horns can be found here. Not sure why anyone else would need to make horns but ......

Now for Featherline (click the name for the pattern). I might as well start with a photo:


I'll admit it up front; this is my second attempt at the pattern. And I didn't do it justice. I don't believe there is anything wrong with the pattern; it's me. I didn't follow the instructions. I followed the diagram. Now, I like diagrams; I prefer diagrams. And there isn't anything wrong with Jon's diagram, it's still me. You see, Jon made the snowflake, so that the centre is done using SCMRs and thrown off rings. You then tie and cut. Then the second round is tatted. I figured I could tat the snowflake continuously and jump from the centre to the second round with no tie and cut.

Well, you can. Was it worth it? Meh. You really can't tell where I split-ringed (there are three split rings) out of the centre to the next round. I can, but its my snowflake. I'm going to tat the snowflake again, probably in a different colour. Speaking of colour, the thread I used is Lizbeth size 20 in colour #605 Silver. Its not a metallic silver, though it would be totally cool if Lizbeth made a metallic thread. A guy can dream. I would think that this thread (and its gold counterpart, which I also have) would look awesome when used with a metallic filament thread. I'll have to try it sometime. In size 20 thread, the snowflake is about 3 inches from point to point. This will be #4 of my Third 25 Motif Challenge.

That's all for now. My next post probably won't be tatting related. I have been working on a new chainmaille product line. I won't give any details, except that its not jewelry. I want to get the pages for Etsy made first before posting here. I might be the first person to think of this idea. Till next time.

Happy Halloween!!!!!!!!!!!!

I figured I should do a quick post. As the title says:

Happy Halloween!!!!!!!!!

It still is Halloween (here anyways). To be honest with you, I really don't like Halloween. I know I can almost hear the screams of horror from those of you who like the holiday. I guess I outgrew the holiday many years ago. Until today.


My workplace encouraged those of us who had to work today to dress up. And, there was going to be a contest. After some thought I did dress up.

Subtle, isn't it? Dressing up made the day quite enjoyable. In case you're wondering, I made the tail and the horns. The horns were made using polymer clay (Fimo), and attached to my head with a black cord. A lot of people (customers and co-workers alike) wondered how the horns were attached. Unless you stood fairly close to me, you couldn't see the cord. The costume turned out better than I though, especially since I altered my original idea. I had wanted to get a red jacket to wear, with the horns growing out of a hat. But the used clothing store I visited didn't have red jackets or suitable hats, so a black jacket was chosen and I opted to not wear a hat. And oddly, a lot of people (mostly co-workers) commented how the costume was very appropriate. I just can't figure out why.

That's all for today. I do have some tatting to show, but its not Halloween related, so I'll make another post about it soon. Later.

Magic Moments & Jasmine

I'm still here. And I have been tatting. Mostly. An early October snow brought on a bout of crochet; but that has mostly disappeared, along with the snow. For now. In case you're wondering, I started another sweater from the Crochet Dude's book, using an Alpaca/Acrylic blend bulky yarn that I have been hoarding all summer.

Onwards to the tatting. I have a number of projects in progress but I'm only going to show one right now. I made my mom a bunch of earrings for her birthday, but I'll make a separate post for them. Another project is a bookmark exchange, but I obviously can't show that yet. So I'll move on to the snowflake.

As the title suggests, I tatted another of Jon's Magic Moments snowflakes. Here it is:

Ain't it perdy? What was that? No, this isn't the same one I made before. See for yourself:

See? The new one is on the left, and the one I made before is on the right. I guess I should explain. The new snowflake (the one on the left) was made using Lizbeth size 40 thread while the one on the right was made with size 20 Lizbeth. Both were made using colour #116 Christmas Delight. I think I mentioned it before, but I'll say it again: I love this colourway! I guess its because I really like the traditional Christmas colours and that brings thoughts of a traditional Christmas. But its too early (in my mind anyways) to go into too much detail about Christmas right now (I'll save my rant of Christmas vs. Holiday for another time). Anyway, I noticed that Jon has another new snowflake pattern on her pattern blog and I want to make that one as well.

Finally, the title also suggests something about Jasmine. I am, of course, referring to the plant. About a month ago, I bought a Jasmine plant while I was at the Home Depot. The plant I bought wasn't in flower, though it did have a lot of dried out buds attached to the plant. Here is a photo of the plant a few days ago:

You can see quite a few developing buds on the plant. And several buds opened as well, see here:

As you might imagine, the fragrance is absolutely magnificent. I can't describe it. And it's strong; a single flower fills an entire room with its perfume. Since the plant was simply labeled 'Jasmine', I did some research on a proper ID for the plant. From what I can find out (and this is based mainly on the flowers), I believe this particular Jasmine is Jasminum sambac 'Maid of Orleans'. But, if I'm wrong about the ID, the plant's fragrance is still heavenly.

That's all for now. Stay tuned for the "Earring Post", coming soon. Later.

The Tatting Book Post - Finally

First of all, I would like to thank everyone who sent their condolences and prayers. My Grandma was very proud of my tatting, and was easily my second biggest fan. She will be missed. I have made her many tatted items as well as an equal (or even greater) amount of crocheted items. Now that she's gone, I really want to get at least some of the larger items (particularly the tatting) back. Hopefully that doesn't make me insensitive or anything, but as far as I'm concerned they wouldn't mean anything to anyone else. I will have to design something in her memory. Since its getting colder out now, perhaps a snowflake would be ideal.

As I mentioned earlier, I purchased some new tatting books recently. The first book is one that I know some of you have already. Its one of Jon Yusoff's books.

Jon even included a cute little tatted snowflake:


There are lots of really pretty snowflakes in this book. So you will be seeing plenty of snowflakes in the coming weeks. Thank you Jon for writing this book.

My next two new books were purchased together. I found them on eBay. The first one is another book some of you may have.

I know. I mainly shuttle tat, but I thought it would be nice to have this book as a reference. I have done some needle tatting, but I wanted a good offline reference. This is the book I wanted in the auction, and in case you wondered, the cost of the two books plus shipping was cheaper than the above book is when new (and without shipping). I am quite pleased with this purchase.

The final book is one that I haven't heard of before.

This is basically a book of older tatting books. It contains such books as Priscilla Tatting Book No. 1, plus four other books. There are a number of cool designs I'll have to try sometime.

I haven't done much tatting since the funeral, but its more of a lack of time rather than a lack of desire. I had purchased some Lizbeth size 40 thread that I am currently using in several projects. Once they are done I'll show you.

One more thing before I go. You may remember the Tillandsia that I blogged about back in June. If not here is a refresher:

Well, a few weeks after this picture was taken, the plant turned completely green again and then went back to doing nothing. Or so I thought. (Insert dramatic music here.) I usually just spray the plant with water while misting the other plants and think nothing of it. A couple days ago, I thought the plant could use a good soaking so I went ahead and did so. Here is what I saw when I did:


I am so proud of the plant. I was kinda hoping for more than one offset, but one will do. I have several other bromeliads, enough to do a whole post on them. Heck, I can even make it tatting related. Hmmmm (stroking beard), that's not a bad idea. Look for that in the near future; though I'll have to get my butt in gear in order for that to work. That's all I have right now. Later.