Homework Motif Pattern

Wow. I didn't expect anyone to actually like the motif I made for the Design-Tat homework. At least, I hope you're all being honest. Anyway, a few commenters mentioned that the motif would look good as a table runner, or perhaps a doily. I played around with the image on the computer last night, and I have to agree with those of you who mentioned it.

You know, maybe it is pretty after all. Seeing many of them together, I actually like the motif more than I initially did. So, for those of you who asked, I will post the pattern for this motif. I have to write the pattern out in both short and long hand for our next homework assignment. I have the short hand done and will share it with everyone. If you have any problems with the pattern, please leave a comment, or email me at: jwh4000ATgmailDOTcom , replacing the AT and DOT with the appropriate symbols.

Abbreviations

R - Ring
C - Chain
- - picot
+ - join
SS - Switch Shuttles

Centre

R 4-4-4-4 RW
C4-4 RW
R4+4-4-4 RW
C4-4 RW. Repeat 6 times for a total of 8 rings and chains, joining the last chain to the first R. Cut, tie, and hide ends. If desired, the last chain can be a split chain consisting of 4/4.

Round 1

R 4-4+4-4 RW (can be a split ring of 4-4/4-4 if a split chain was used in the centre)
[C 6 RW
R 6+4-6 RW]
Repeat between [ ] two more times
C 6 SS, R 6-2-8 SS, C 6 RW
R 6+4-6 RW
C 6 SS, R 8+2-6 SS, C 6 RW
[R 6+4-6 RW
C 6 RW]
Repeat between [ ] two more times
*R 4+4+4-4
[C 6 RW
R 6+4-6 RW]
Repeat between [ ] two more times
C 6 SS, R 4-4-8 SS, C 6 RW
R 6+4-6 RW
C 6 SS, R 8+4-4 SS, C 6 RW
[R 6+4-6 RW
C 6 RW]
Repeat between [ ] two more times*
R 4+4+4-4 RW
Repeat between * * two more times, joining the last chain of the second repeat to the first R.

I hope you can follow this pattern. And if anyone knows of a good name for this motif, please post in the comments. I, quite honestly, can't think of a good name. Homework Motif 3 isn't a good name IMHO. Goodnight. I have to go power down for Earth Hour.

Thread from Exchange and Homework

I finally have gotten around to posting. Still haven't done much tatting, but I am making progress on my next crocheted piece. I did get my homework done for Sharon's Design-Tat group, which I'll show at the end of this post. I'm not sure when I'll get back to tatting. I cut one of my fingers at work a few days ago (nothing serious, but the bandage interferes with the tatting; crochet is easier, but not being able to feel through the bandage slows things down a bit). Typing is slow, but possible, though this post took two days to write.

As I mentioned in my last post, I participated in Kathy's Thread Exchange this year. So far I have received 4 out of the 5 threads I was to get. I do believe the fifth thread is on the way (I got an email today that one of my partners received her fifth thread, so I should be getting mine.) Any way here are the threads that I have received so far. First up, is from Trayna F., from Scotland. She sent me two lovely threads.

The first is Coats #20, colour # 4148, the second is Manuela #20. Trayna believes that both are discontinued. That fact alone makes these very special. Since I can't get anymore, they will have to be used for something special. Giving us (I think everyone got the same threads) these threads was very generous of Trayna. She also sent a postcard.

The next thread is from Patty B, of TN, USA. She sent a very colourful sample.

This is DMC size 80 thread, I'm not sure what the colour number is. I have a ball of this thread, but I can't find it. As I mentioned earlier, I have started to like size 80 thread, and intend on using it more.

The next sample is from Karen F. from OR, USA. She sent a very lovely sample of silk thread.

This is LadyShuttleMaker's Karen's Halo Silk HDT, size 20. A really cool fact is that I got this thread from the Karen that the thread was named after. This little fact make the thread a little more special. She also sent a really cool card:


Pretty cool, huh? Karen herself rides a motorcycle.

My final sample of thread comes from Libby H. from SC, USA. She sent two samples as well.

The pink is a sample of Cebelia #223. The second sample is Sulky #40 in colour #942-523. I haven't tried this thread before and I am looking forward to using it. It is 100% rayon.

I would like to express my thanks to all of you generous ladies that I exchanged threads with. As I mentioned, the fifth sample has been received by a few of the other ladies now, so once I receive my thread, I'll post about it.

Finally, I have a picture of my homework for Design-Tat. It's not pretty, but I think it will do for now.
I kinda like it. It reminds me of a butterfly. I might rework it some other time. I have to write out the pattern for our next homework assignment. I would like to get back to my other tatting projects. I'll post again with pictures of my orchids that are currently in bloom. Later.

Quick Update

I'm still here. I haven't done much tatting since my last post. I joined Sharon's Design-Tat Yahoo! group and have been working on the homework that Sharon is posting. I'll have to post pictures. Why am I not tatting? I am working on another design from the Crochet Dude's book. I purchased new yarn in solid colours, with matching dye lots to make this design. I'll post a picture or two when I have it completed.

I also participated in a thread exchange recently and have been meaning to post pictures of the thread I received. And finally, I have a few orchids in bloom and I bought a new orchid yesterday (yeah, like I needed another one; and this one is nearly 3 feet tall), so I have some pictures of them to share. I really need to get my butt in gear and work on the tatted versions of these plants. Hopefully, I'll get organized and will do a proper post (or two; I may have too much to post in one shot) in a couple days. Later

Renegade Dawg, and a Tatted Motif

Quick update from my last post: as it turns out, everyone agreed (not with me) that the Tatting and Teneriffe Lace Hexagon doily should be left as it is. I still think it needs something to tie the motifs together. I have decided that I will leave the doily alone for a week or two to see if my opinion changes. In the meantime, I will make another hexagon using my last Teneriffe medallion (I'm going to have to make some more), and try my edging idea on that one. Maybe I'll be right; maybe I'll realize my idea won't work.

I mentioned in my last post that I had completed my Dawg hoodie by the Crochet Dude, hereby known as Renegade Dawg (thanks Sherry). I took a few pictures of myself wearing it. These are probably the best pictures I have taken of Renegade Dawg (though not of me, but then I hate having my picture taken, so I'm biased). You can see the colour variation really well is these pictures; I actually like the way it come out. Onwards to the pictures.

Out of all the pictures I took, this was the best (and I still don't like it). I would like to mention, that I usually wear glasses, but I took them off due to the funky ways the camera flash kept glaring off them. Anyway, here is another picture, one from the side.


This one is better. And, again, shows the colour variation really well here. Finally, here is one more picture of me wearing Renegade Dawg. The photo has a bonus in it.

Yup. I'm tatting in this one. This is probably my favourite of the three photos. I'll discuss the tatting later. I would like to thank all of you who commented with suggestions on how I could lessen the mismatched look of the different dye lots. I used each and every one to finish the hoodie.

Finally, I decided to participate in Sharon's design challenge (this sounds familiar). I had planned on using the rose, along with a few rounds of additional tatting to replace the Teneriffe in my hexagon pattern. The outer rounds were supposed to be the same as said hexagon. It didn't work that way:

This is my Tatted Rose Hexagon - Mark 1. While working the design, I came across a few modifications that need to be done. So you will probably see a Mark 2, and perhaps a Mark 3 before I am fully satisfied. This will be motif #21 of my Second 25 Motif Challenge. All future motifs based on this motif will not be counted. Later.

Return of the Tatting & Teneriffe Lace Hexagon

Tatting and Teneriffe Lace Hexagon? Some of you may not have any idea what I am talking about. Using a small round motif I made using Teneriffe Lace (brief definition from Wikipedia here), and surrounding it with tatting, I created a hexagon shaped motif that became motif #2 of my 1st 25 Motif Challenge. You can read that post right here. I originally decided to continue making and joining a total of 7 hexagons to create a doily. However, after only four, I liked how it looked, and quite frankly felt it would be too large for my purposes.

At it present size, the doily measures 10 3/4 inches long and about 8 inches wide. Its not done, as evident by the two long threads coming off of the split chain in the upper left quadrant of the picture. Funny story here. You remember Roomba, right? If not, click here for some background on my Roomba. I really don't know how, but somehow Roomba got a hold of the thread between the fourth motif and the shuttle (this was before I joined it to the rest of the doily). You could probably imagine what happened next. I spent several minutes carefully unwinding the thread out of Roomba's brushes. A picture would probably be good right here, but I never thought to take one. I was shocked by this behavior. And to think that I had purchased Roomba the Scheduler Upgrade with the charging Home Base that its been begging me for. Anyway, I had place a Magic Thread in the first chain of the second round. Had was the key word here. Somehow, Roomba pulled out the MT. Fortunately that was the only damage to the motif. Maybe Roomba's AI (artificial intelligence) was trying to express it's creative side. I'll never know. With the MT gone, I realized I like how it looked, and didn't need the MT, since I could split chain into an edging. Which brings me to a design problem. Roomba hasn't told me how I should finish the doily.

In its current state, I'm not happy with the triangular space between the four motifs. The following picture illustrates these spaces better.

My problem could be solved with at least two solutions. The first one involves making an edging consisting of two rounds. The first round would be simple, perhaps just chains until I get to one of the triangular spaces (like the one above), where I could hopefully use rings and chains (or perhaps chains and mock rings) to fill in the space. A second round would tie the whole design together. The second solution would involve making four small filler motifs separately, joined as I made them. Followed by the second round, again tying the whole thing together. I am going to have to think about this one; though I prefer the first solution. Suggestions are welcome, as always.

I've also decided to take Sharon's design challenge #4. The rose is almost done. My ultimate design is similar to the above hexagon. That's all I'm saying right now.

For all of you wondering, the "Renegade Dawg" hoodie is done. I'm not ready to show it just yet. I just dyed my mustache and goatee right before I started this post, so I'm not ready to model the hoodie yet. And no, I didn't use blue dye. I don't think I would be allowed to have blue hair/facial hair at work.......but it would be so cool. Later.

Tatted Micro Dragon and Hoodie Update

Just a quick update: I don't want anyone thinking I disappeared. I took a short break from crocheting to tat this little dragon from Anne Bruvold:


This is Ringtrim, a Norwegian Micro Dragon. For this dragon, I used DMC Perle Cotton size 12 in colour numbers 932 and 503. This is a cute and fairly quick pattern to tat. Instead of using Single Shuttle Split Rings (SSSR) for the first five rings, I used regular SR, then cut off shuttle 2 and added the second colour. I then continued on with the instructions. I won't count this as a motif in the challenge.

As I mentioned in my previous post, I am working on a crocheted hoodie design by the Crochet Dude. I have the back, front, pocket, and both sleeves done. So, I am ready to begin assembly, then can work on the ribbing and hood. Now, I mentioned briefly about having some colour differences between the old and new version of the colour I am using. As it turns out, the new yarn varies dramatically in dye lots as well. I didn't notice that when I purchased more yarn. Here is a photo to (hopefully) illustrate my point:

The sleeves are both in the new Bernat Camouflage 'Renegade' and the front and back are in the old. I had been trying to match the colours, but at this point I don't think I can. I have decided that I will finish the hoodie, trying to be consistent and will remake this again in a new, consistent colour. This one will be worn at home, unless it turns out really cool. Once this project is done, I return to tatting for a little while. Cheers.

It Finally Happened for Crochet, What About Tatting?

I hinted about a new crochet book that I purchased in my last post. Here is a bit more detail. First, a picture of the cover:

Hopefully I can post a picture of the cover. Anyway, the book is called The Crochet Dude's Designs for Guys: 30 Projects Men Will Love by Drew Emborsky AKA The Crochet Dude (blog) (Amazon.com link). The book lives up to its name. Out of the 30 projects, which range from an assortment of sweaters to hats and even a belt and tie pattern, there are only a couple I don't like, and a couple I could like with a few slight modifications. This book is apparently the first book to be completely oriented for men's crocheted clothing. Though some of the patterns could work for women as well.

Not being able to wait to try one of the patterns in the book, I began one of the sweater patterns. Actually, the pattern is a hoodie, and the patterns name is "Dawg". All of the patterns have cool names like this one. I bought some yarn several years ago that I was saving for a cool pattern. The yarn I had is called Bernat Camouflage in colour "Renegade". Of course I didn't have enough yarn to make it. After making the back of the hoodie, I figured I had enough for the front and the pocket that goes on the front. No problem, I thought, I could go buy more. Since the yarn was a camouflage colour, it wouldn't matter if there was a slight colour variation. What I didn't know was that Bernat seems to have redid the colours of Renegade (and perhaps the other Camouflage colours). Instead of a slight variation, I got this:

The new colour is on the left, and the old on the right. I had initially thought I could use the two different colours, as long I did not mix the old and new colours in the same section. I am currently working on a sleeve in the new Renegade. And as the sleeve nears completion, it becomes apparent that using both versions of Renegade will not work. Or will it? I'll post a picture of the completed pieces soon, in better light, and seek your opinion. Now, back to crocheting. Tatting will have to wait.

Here Be Dragons, er, Dragon (Overrun again...)

You would think that since Canada has such a cold climate during this time of year, dragons would shy away from us. I was wrong. Again I am being overrun by dragons (er, dragon). Here is my latest dragon visitor:

This is Karey Solomon's Dragonet from her book Here Be Dragons. Karey's dragons are really cool. The large quantity of beads can make them a pain in the butt to tat, but they are definitely worth it. Laura posted her attempt at the pattern, which inspired me to give the pattern a go. I purchased the book several months earlier. I'm almost embarrassed to admit that I didn't have any problems with the pattern. OK, the head and the wings don't look quite right (to me anyway) because I think I made a join between the wrong beads. As you can tell, I made a slight variation to the head. I had a thread break and it was necessary to reattach the thread. It just so happened that the break was in the right spot. Partly because I didn't want to hide the ends, I left those two at the lower jaw to give a dragon a beard, thing. I found the pattern relatively quick to make. This is probably due to all the beads in the centre of the body. I did most of the dragonet in a single evening; finishing it the next day or so. Unfortunately, this is the only bit of tatting I have accomplished since my last post. Karey's Dragonet is motif #20 of my Second 25 Motif Challenge. I used Flora size 20 thread in colour #219.

Since I have reached #20 on my Second 25 Motif Challenge, I have decided to work on some UFOs for my final motifs. I am starting to get several piling up, and I want to get them finished.

This past Wednesday (January 28) was my Birthday. I decided I was going to take a trip to a local knitting and needlework store after work (yes, I had to work on my Birthday). The store is called Prairie Lily Knitting and Needlework Shop. For such a small store, there is a lot of stuff packed into it. While I didn't have a lot of time to spend their, I did find a few threads that are suitable for tatting. And here they are:


These are, of course, pearl cotton. The top two are Valdani Pearl Cotton, size 12. I love the colours that the Valdani threads are available in. The bottom three are DMC Pearl Cotton. The first two are different shades of blue, and the third is a minty green colour. The two balls of DMC blue cotton were a given; the other three just spoke to me. I'm not sure what I will make with them, but I will find the perfect project.

These are DMC Pearlescent Effects embroidery floss. I really like using floss for small projects since they are available in a wide range of colours, textures, and fibers. The picture makes it hard to tell but the one on the right is a minty green while the one on the left is white.

My final purchase is a thread that I haven't used before. And here it is:

As you can see in the photo, this is Wildflowers thread by Caron. I haven't used this thread before, though I know some tatters just love this thread. This thread was not calling out to me; it was shouting. Very loudly, I might add. In case you're wondering, the thread colour is called "Nefertiti" (#008).

That's about it for now. I'm hoping to get some tatting done over the next week or so, but I somehow doubt that will happen. I recently bought a new crochet pattern book, and have been drooling over many of the designs. But I will post about it separately. Until next time.

Golden Celtic Snowflake & Beaded Christmas Tree Earrings

I redid Ruth's Celtic snowflake recently. I really like this version:


Sparkly, isn't it? For this snowflake I used Oren Bayan Metallic thread in Gold (#032). I love this metallic thread. I have tried many metallic threads over the years and this one is by far the best. This particular snowflake was tatted for someone very special and will be mailed to them today (hopefully). Who is this special person? I won't say, but I'm sure we will all hear about it when they get it. This is motif # 19 of my Second 25 Motif Challenge.

Finally, I am going to show another gift I made my mom for this past Christmas.


I thought these earrings were really cool and figured my mom would love them. I got the idea from my favourite bead store, Beadfx. While they don't have step by step instructions on how to make them, this page will give you a general idea. They aren't hard, actually. Here is a much better photo of them;


The top bead is a bit too big, but I used what I had. Well, that's it for now. I am working on another tatted project which should be complete by tonight. I'll post a picture of the completed motif in a day or so. Later.

Miniature Quantiesque Snowflake & a Crocheted Afghan

I made Jon's Quantiesque Snowflake again. Here it is:

I think it looks better than my first attempt, but I'm sure some of you may disagree with me. Obviously, you can't tell how big the snowflake is from this picture. How about from this picture:


The fancy coloured Canadian quarter is the same size as a US quarter. Bit of background info here: the coin is a circulation coin that the Canadian Mint released in 2004 to commemorate Canada's 117,000 war dead. Back to the tatting. For this snowflake, which went to my last Round Robin partner was tatted with size 80 thread. DMC size 80 thread to be exact, in colour numbers 93 (variegated blue) and 520 (white). Sorry Jane, I couldn't allow myself to tat the snowflake in one solid colour. Maybe the next time. Using size 80 thread is quite an accomplishment for me. In case you haven't noticed, I tend to use size 10-50 thread for the most part. I really don't like working with the really fine stuff. I think the biggest reasons why I don't like the really fine threads is that, 1) it can be difficult to see the individual double stitches, 2) it can be hard to hide the threads when done, or when new ones have to added in, & 3) retro-tatting can be very difficult, see #1. In order to hide the ends (and I had 7 to deal with, 4 in the outer round alone; don't ask, please), I either worked over the ends as I went, or used Magic Threads. But in the end, I am happy with how it came out. The second photo shows both Quantiesque snowflakes side-by-side. This is motif # 18 of my Second 25 Motif Challenge. This is not the last snowflake that you will see. January is still a snowflake tatting month. It's also my Birthday month; only 2 weeks to go!

One of the Christmas gifts that I made this past Christmas was a crocheted afghan for my Mom. Here it is:


Ahhhhhh! I don't know why blogger rotated this photo. It doesn't appear this way on my computer. Well, if you tilt your head to one side, it should be OK. Oh, and ignore the adorable black splotch that somehow got on the afghan. I spread the afghan out on my parents couch and left to get my camera. I was only gone for a minute or so. Every picture I took had this mysterious black splotch on the afghan. This one is the only one that would be rated G, the others are more like PG. I think I may be in enough trouble with Tattingchic with the mermaid and turtle fiasco to post the other pics. Those pictures showed the cat, um, grooming, um, himself. Let's leave it at that. Here is a closeup picture to show the texture of the aghan (I cropped out the black splotch):

The afghan is made from a pattern called "Speed Hook Shell Afghan" by Lion Brand yarn. Pattern located here. Please note, you need to be a member to get access to the free pattern. However, I recommend joining if you enjoy crocheting or knitting. The afghan is made with Lion Brand's Size S (19mm) "Speed Hook". This thing is huge. For reference, each 5 double crochet (treble crochet for my British audience) shell is about 4 inches across, and nearly 2 inches high. On my monitor, each shell in the full size photo is roughly life size. I believe it took about 7-8 hours to complete each afghan. I made two of these afghans; the one pictured used the Wool-Ease® Thick & Quick Yarn that was recommended in the pattern. The second afghan used two strands of a much cheaper worsted weight yarn (each strand was a different colour blue, this gave the afghan a denim look). The second afghan went to my grandmother. I, as usual, forgot to photograph it.

That's it for now. I have a few more non-tatting items to show you. Now that the Round Robin is coming to an end, I'll be able to work on other tatting items soon. Au revoir.

Tatted Snowflake, Crocheted Bookmarks, and an Orchid Photo

Before I begin, I hope everyone had a good New Year's. Mine was alright; I had to work New Year's Day, but it wasn't that bad. The store was fairly quiet, and I'm not complaining about getting double time pay for several hours of the day. I'm not one to make resolutions for New Year's. I mean, if I don't make them, I can't break them, right? However, I will try to get the patterns I designed (Male Betta, and the Venus Fly Tat) written out and diagrammed. Actually, the Betta is partially written, and the VFTat is diagrammed. I also would like to design more patterns. I have many ideas I'd like to see come into reality; some flora in nature, some piscine (the Betta needs more friends) and a special project. I would also like to mention that January 1 was the first anniversary of my blog. I really appreciate having all of you reading my blog, and especially everyone who leaves comments. Thank you so much for visiting.

Here is another snowflake made for the Snowflake Round Robin.

This is Lenore English's "January Reflections" snowflake. I love this pattern. It is probably my favourite snowflake of Lenore's, though the others are close behind. For this flake, I used DMC Cebelia size 30 thread in colour # 797. This is motif # 17 of my Second 25 Motif Challenge. Jon's snowflake from a few posts ago was # 16.

I didn't get any tatting done over Christmas. For several days before I was crocheting bookmarks like crazy. I wanted to make some different looking bookmarks and they had to clearly masculine for the guys and feminine for the ladies. For the guys I chose crocodiles:


And for the ladies, turtles:


I know, turtles can be masculine as well, but not as much as crocodiles. They are all made with size 10 crochet cotton in a variety of colours, brands, and ages. They are all lightly starched so they hold their shape. I'm sure you're wondering, "Where can I get these awesome patterns? I really need to know!". Well, they are from a talented crocheter from Australia called Crochetroo. You can buy the patterns from her Etsy shop. She has a number of patterns available, as well as some finished items. I highly recommend the patterns to all you crocheters out there.

Finally, I have an orchid photo for all you plant and orchid lovers out there.


This is Paphiopedilum spicerianum 'St. Albans' x self, HCC/AOS, a tropical Lady Slipper orchid. This is my first Paphiopedilum to flower. I was so excited to see the bud forming early in December. I can't wait for the other four Paphs to flower, whenever they decide to. Before a Paphiopedilum can flower, it must first grow an offset, since once a plant flowers it cannot grow anymore (the flower stalk comes out where the leaves usually grows). This plant grew two offsets within a couple months of me getting it. As long as each of these offsets grow their own offsets and so on, I could end up with a large plant sending up multiple flowers each year. I can't wait for that day to come.

That's about it for now. Oh, before I forget, I have a request from all of you who live in a warm climate. Could you send some of the heat up here? We are currently -40°C, -52 with the wind chill (that is, how cold it feels when the temperature is combined with the wind; a wind chill temperature doesn't have a C or an F behind it because it is calculated and not an actual measured temperature). I have more stuff to post, so it shouldn't be too long before I post again. Until next time.

Happy New Year!!!!!!!!!

Happy New Year!!!!!!!!!

I hope everyone has a wonderful New Year and will get lots of tatting done.

I will try to have a regular post tomorrow, but who knows if it will happen. We have a snowfall warning right now, and that may affect tomorrows activities. Take care, and have a safe New Year.

Quantiesque Snowflake

Just a quick update; not ready to post anything else yet. I finally got around to tatting Jon's gorgeous Quantiesque snowflake. Here is my attempt:


My attempt at this pattern doesn't do it justice. This is one gorgeous flake (I think I said that already...). I can see why everyone has been tatting it for the last few days. The pattern is easy to follow, and doesn't use any difficult techniques. Highly recommended for all tatters to try. That is, if there are any left who hasn't tatted it already! For this flake, I used Valdani Pearl cotton size 12 in colour number M95: Mediterrana, and DMC Cordonnet size 30 in white. I love Valdani threads, but, I guess due to the the six cord thread and HDT I have be using lately, I wasn't used to how soft the thread is. I guess I'll have to start using it more often. I also think that the pearl cotton and DMC thread were not quite the same size as the the second section (the white part) seems a bit larger than it should be. I will make the snowflake again, using better matched threads. Perhaps in HDT.

That's about it for now. I will hopefully have my other pictures ready to post soon. I also have a few orchid photos to share; one new one (I know, I know) and one I've had for a while that recently had a opened flower. That's all for now. See ya.

Oh, I almost forgot. Jon, if you see this post, you have my permission to copy my photo of your snowflake to post on your blog.

----------------
Now playing: The Grass Roots - Let's Live for Today
via FoxyTunes

Merry Christmas!

Merry Christmas Everyone!

I hope everyone had a very Merry Christmas. I'll post again in a few days once I recuperate from the holidays!

NB: I meant to have this post set as a scheduled post but I forgot about it.

Yarnplayer's Dream Pendant

After Yarnplayer (AKA Marilee) posted her variation on her own "Dream" necklace and earring pattern, I just had to try it. And here is my attempt:

The original pattern is pretty easy to make and Marilee's variation doesn't add much complexity to the pattern. For this pendant, I used some of Marilee's "Purple Punch" HDT along with some metallic purple size 8 seed beads, size 6 silver lined crystal seed beads, and some very light purple drop beads. With all this purple, this pendant will obviously be a Christmas gift for my mom. I may be able to make a couple more for gifts before Christmas. I'll have to see. This is motif #16 of my second 25 Motif Challenge. Till next time.

Presenting.... The Mermaids!

This blog entry is rated R.

Happy, Tattingchic? Just kidding.

Well, I've threatened to show them. And many of you wanted to see them. Here they are. Bring out the ladies:

These are Martha Ess's Block Tatted Mermaids, sometimes referred to as the Naughty Mermaids. I can't imagine why. Actually, I can think of a couple of reasons. VBG! By the way, this is a very guy friendly pattern. These three, in order of appearances, went to my dad, uncle, and brother last year for Christmas. I still need to make one for me. I will show her when I do. Did I hear someone say they wanted a closer look? You command and I obey:


I'm not sure if it is obvious, but these mermaids were made into bookmarks. In case your wondering, I used the following threads: DMC Cebelia 30 in colour # 754 (peach), 797 (blue), 666 (red), & 699 (green). The hair was made with Finca pearl cotton size 8 in colour #741. The sea weed was made with Finca pearl cotton size 8 in an unknown variegated green (unknown because I can't find the label!). I should mention (again) that these were made last year and are not part of my 25 Motif Challenge. I hope you have enjoyed this post, and fully recommend this pattern to other tatters. If you wish to make them more acceptable (Gasp!) you could use small shells to cover her, um, you know.

Disclaimer:

The above pattern was created by the brilliant Martha Ess, and only tatted by yours truly. The pattern was posted on Martha's website over a year ago. This proves that I did not introduce any indecency to the art of tatting.

Snowflakes, Turtles, and Snow

As with many other people, I have been busy working on Christmas gifts. I do have a few tatting related items to show. However, I would like to mention something first. Snow! I can't stand it! We didn't have any snow until recently. It started last week, and it seems that it is snowing nearly every day now. And (I'm not sure if this is just local, or if it happens everywhere), but after the first snowfall of the year, most drivers forget how to drive in the stuff. I think I got that out of my system right now. Be prepared to hear this again in January.

The first tatted motif I have to show is the third snowflake for the Snowflake Round Robin:

I should mention that this is not the snowflake I sent to my next partner. I was in a rush to get it mailed and I forgot to scan the thing. I heard that. I prepared this snowflake earlier for just such an emergency. OK, not really, I just really like this pattern. The snowflake is called "October Enchantment" by Lenore English. I used DMC Cordonnet size 30 thread to make the snowflake. This is motif # 12.

The next snowflake is one designed by Nancy Tracy:

I don't even remember seeing this snowflake of Nancy's. I'm not sure how I could have missed it. The snowflake was actually pretty quick to tat. I tatted the snowflake continously instead of cutting and tying each round. I used DMC Cordonnet thread size 30 (I think) for this snowflake. This snowflake was supposed to be used for the Snowflake RR, but at over 4 1/2 inches in diameter, it came out much too big. I'm going to use it for a Christmas gift instead. This is motif # 13.

The third (and final) snowflake is again a Ruth Perry design;

Again, this is Ruth's Celtic Snowflake 2008, this time done in some HDT. I used some of Yarnplayer's "Winter Blend" HDT in size 50. I just love this pattern, and Marilee's HDT. This snowflake is also going to be a Christmas gift. I currently have another one of these snowflakes in progress, but done in a different thread. The Winter Blend Celtic Snowflake is motif # 14 of my Second 25 Motif Challenge.

Finally, I made another one of Teri's turtles. This time, fully, cloth---er, shelled. Be warned Tattingchic, I will show the mermaids that I made from Martha's pattern. And you thought a naked turtle was bad!

This turtle was made using C-lon Micro thread. This is the thread that Teri recommends for her turtle patterns. It is quite nice to tat with, as long as you don't tat too tight. It does handle a little retro-tatting if necessary. And as a bonus, due to it's stiff nature, items made with it shouldn't need stiffening. BTW, this turtle is mine! I hope to make a few more yet before Christmas. This is motif # 15.

I think that is all for now. Besides another snowflake to make for the SRR, I may not get much tatting done. I have two afghans to crochet for Christmas gifts. That isn't as big a feat as you may think. I am using Super Bulky weight yarn and a size S (19mm) hook. Yes, you heard the size right; there is a hook available that is bigger than a Q! Till next time.

Update! Naked Turtle No Longer Naked

Due to recent insomnia, I worked on the turtle last night. And here is the final result:

The beading part of the pattern went pretty quickly (to my surprise). I couldn't find the beading needles that I had bought (for a purpose that I don't remember!), so I used the next best thing, a floss threader. Yup, I used a floss threader to do the bead work. It worked, but next time I will use an actual needle. Teri doesn't mention what she uses to do the beading. I really like how the turtle turned out and will make some more. I see some of these becoming Christmas gifts. Since the size 50 thread worked, I might try some HDT next time.

I never mentioned why I wanted to make this pattern. It's because there isn't very much tatted jewelry or wearables for men. Sure, Ruth Perry has a few patterns that she calls masculine as well as a few that could be made manly (the Celtic watchband in her new book for example). I'm sure there are others that could work. I don't wear much jewelry; only a chain with a Sterling silver dragon on it. I would love to wear some tatted items besides what can be sewn onto clothing but it has to be masculine looking. A tatted dragon would be nice, but most are too big for my purpose. Anyway, that's all I have right now, I'm starting to ramble. Later.

BTW Tattingchic, I almost choked on my Coke when I read your comment on the previous post! Should I have my blog rated R now?

Another Snowflake, Stone Discs, and a Naked Turtle

It's been a while since I last posted. I have been alternating between snowflakes for the Snowflake Round Robin (have a look at the gorgeous snowflakes that have arrived at their destinations, but remember to come back!), and working on Christmas gifts for various family members. These gifts are crocheted, but I will have pictures once they are done. Here is my next snowflake that I sent this past Friday:

This is "The Eighteenth Day of Christmas" by Lene Bjørn from her book "24 Snowflakes in Tatting". Again, for this snowflake I used DMC Cordonnet size 50 thread and Guttermann Metallic thread. I wanted to use this thread combination for all of the snowflakes I am making for the Round Robin, but I will probably run out of the size 50 thread before I am done, so I will have to use other threads as well. This snowflake is motif # 11 of my Second 25 Motif Challenge.

Like many people (I think, anyways), I am facinated by the tatted turtles that Teri Dusenbury makes. If you go to her blog (remember, come back when you are done!), and scroll down, you will see some of her turtles. She has the pattern available for a fairly simple version of her turtles. If you want it, go to her blog, and on the right side under Tatbits Tatting Patterns, select the Tatting: Turtles link. Once there, select the bottom pattern (Tatting Turtles Agile.......). I don't know if I should link directly there, so I won't. Anyway, for the turtle you need these small stone discs for the turtles shells. These discs look like this:

I know, discs are round and these are oval, but bear with me. The green discs are Jade and the others are Tiger's Eye. The small discs are the size that Teri calls for in the pattern, but I wanted to get a couple larger discs so I can try to scale up the pattern. I said try. I also ordered some of the thread that Teri calls for as well (I guess you could call four spools some).

While I am waiting for the thread to come, I decided to give the pattern a run through to see if I could even make the turtles. Here is where the naked turtle comes in! Presenting the naked turtle:

See? It has no shell; so it's naked! I guesstimated the thread size to be about a size 50, and I think that it is very close. Probably somewhere between a 40 and 50, but I may be able to add the shell. If you are unfamiliar with the pattern, the shell (ie: the stone discs or cabochons) are beaded onto the tatted turtle which encloses the disc in the process. I am planning on trying this real soon, though I don't know how well this will work. Teri waxes the thread heavily while working with it for both the tatting and bead work, and I don't have any "wax" (the product she uses isn't actually wax) to use so I will skip that step.

That is pretty much it for now. I'll try to post again soon. Until next time.

Snowflake Round Robin and Wooden Boxes

I think I mentioned earlier that I joined the Snowflake Round Robin that Sharon B. is running. Our first snowflakes have been made and sent, and a few lucky people have already received theirs. I know these things because I'm the Group Coordinator. Anyway, since I haven't received mine yet, I'll show you what I made for my first partner:


This is, again, Ruth Perry's Celtic Snowflake 2008. This time, I made the snowflake in DMC Cordonnet size 50 combined with Guttermann's Metallic Thread. This is the same thread I mentioned in a previous post. This combination works out to be equivalent to a size 30 thread. It is about 4 inches in diameter. The colours of the metallic thread really comes out in a larger sized piece of lace. I love this thread! I'm going to count this as motif #10 of my Second 25 Motif Challenge.

Inspired by Diane's recent find at Michaels, I decided to get one myself.

Yup. It's one of those Photo Treasure Boxes. I'm pretty sure it is slightly different from the one Diane found. But I guess that is to be expected; I'm sure each Michaels store has a slightly different inventory. I figured that the box would make a nice shuttle box to hold my small but growing shuttle collection. It is a little small for this purpose, at least for the way I envision it to be. You be the judge:


It only holds maybe 4-6 shuttles, depending on the size. Not to worry (I'm sure none of you will, but bear with me), while I was at Michaels I saw another box that looked suitable. I went back a few days later, armed with a 50% off coupon, and purchased the box. Here it is:

Michaels calls it a "Cigar Box", but to me it was screaming "Shuttle Box"! The approximate outer dimensions are as follows: 8 1/2" x 8 1/4" x 1 3/4". I think it will be very suitable. See for yourself:

See. I told you. Now, I need to finish the box to make it work. I was thinking of painting the box. What colour you ask? I was thinking of a nice glossy bl.................. black! What were you thinking? After it is painted, I will line the bottom with black felt. Finally, to hold the shuttles in place, I'll add some loops of elastic. This will probably wait for a while. I have a few crocheted gifts to make, and of course snowflakes for the Snowflake RR. That's all for now.
----------------
Now playing: The Puddle Jumpers - Pay the Piper
via FoxyTunes